Presets Drop-Down; Mode Buttons - Extron electronics DMP 64 User Manual

о
To view the individual processor defaults, press the + button on the name of the
processor, trim, gain or meter device.
Window Menu
• Cascade — Rearranges all open DSP Configurator program
windows, including dialog boxes, in a cascading array.
•
Close All Windows — Closes all open dialog boxes.
• Individual Windows — Brings the associated dialog box to the front of the desktop.
Help selection
The Help menu contains the following elements:
• Contents — opens the Help file at the Contents tab.
•
Search — opens the Help file at the Search tab.
• About... — displays the name of the application, the current version number, and
copyright information.
NOTE: Help can be activated via the F1 key from any main screen or dialog

Presets Drop-down

Displays a list of up to 32 presets. Select a preset from the list to
display it in the window and either activate it (
selection without either recalling or deleting it (
( ).
Delete
NOTE: An asterisk in the drop-down list indicates a partial preset exists only in
the DMP 64 and has not been uploaded to the DSP Configurator.

Mode Buttons

Allows selection between Live mode and Emulate mode. See
Emulate Mode vs. Live Mode
Backup
When in Live mode (connected to a DMP 64), if presets exist in the DMP 64 that are
not present in the DSP Configurator program (indicated by an asterisk next to the preset
name), the function halts and prompts the user to run a backup.
Backup (
File > Backup
the DMP 64 to a DSP configuration (.edc) file within the DSP Configurator program and
then displays a prompt to save the file to the hard drive. Backup is unavailable when the
DSP Configurator program is in Emulate mode.
(which accesses context sensitive Help).
for more information.
) transfers all partial presets plus the current configuration from
Recall ), abort the
), or delete it
Cancel
DMP 64 • Software Control 90