Extron electronics DMP 64 User Manual page 122

Presets: Pull vs. Push or Create Live
When a preset is pulled from the device, the preset data remains in the device until the
preset has been recalled. The DSP Configurator pulls the names of the presets only. These
presets cannot be saved to disk until they have been recalled.
An asterisk next to the preset name indicates that only the preset name has been pulled
from the device, and the preset data exists only in the device (it has not been recalled).
Presets pushed to the device or created in the DSP Configurator in live mode have no
asterisk. Presets with no asterisk can be saved to disk.
Protected Configuration
Protected Configuration is a configuration secured with PIN protection. The protected
configuration can be recalled by any user, but can only be written/overwritten using the
assigned (up to) 4-digit PIN. Utilities for save/recall/change PIN, separate from preset save,
are accessed from the tools menu as three sub-menus under a protected configuration
menu item.
Protected configuration menu items are only available in live mode from the
Tools | Protected Configuration
mode, and are unavailable in Emulate mode.
•
Save
• Recall
•
Change Password
Save Protected Configuration
The default PIN is 0000. The user can enter the default PIN or use the Change PIN (see
below) dialog to create a new one.
Recall Protected Configuration
The dialog informs the user, "Recalling the protected configuration will overwrite all audio
and video settings currently in the device. Are you sure you want to continue?" Click
to continue or the operation.
Cancel
Change PIN
The change PIN utility allows the user to change a current protected configuration PIN.
The current PIN must be entered before changes are allowed.
menu. These functions can only be performed in Live
DMP 64 • Software Control
OK
116