Extron electronics DMP 64 User Manual page 66

Command/Response table for basic SIS commands (continued)
Command
Presets, I/O Names
Write preset name
Example:
Read preset name
Example:
Recall a preset
Example
Write input name
Example:
Read input name
Write output name
Example:
Read output name
Resets
Reset presets and names
Reset an individual preset
Reset a group
NOTE: See Group Masters, for more information about audio group masters.
Reset flash
System Reset (factory
defaults)
Reset all device settings and
delete files
NOTE: This reset excludes IP settings such as IP address, subnet mask, gateway IP address, unit name, DHCP setting and
port mapping (telnet/web/direct access) in order to preserve communication with the device.
This reset is recommended after a firmware update.
Absolute reset
X#
NOTE: = Input number
X@
= Output number
X1)
= Preset #
X1!
= Name
X2)
= Group master group number
ASCII command Response
(host to device) (device to host)
EX1) X1! }
, NG Nmg
E }
1,Security 1NG Nmg01,Security 1
EX1) } X1!]
NG
E }
2NG Security 2
X1)
. Rpr
5.
Rpr
EX# X1! }
, NI Nmi
E }
9,Podium cam1NI Nmi09,Podium cam
EX# } X1!]
NI
EX@ X1! }
, NO Nmo
E }
1,Main PJ1NO Nmo01,Main PJ1
EX@ } X1!]
NO
E }
ZG Zpg
EX1) }
ZG Zpg
E X2) }
Z GRPM GrpmZ
E }
ZFFF Zpf
E }
ZXXX Zpx
E }
ZY Zpy
E }
ZQQQ Zpq
01 – 06
01 – 04
32 maximum (0 = current configuration)
12 characters maximum
01 - 32
Additional
description
X1) X1!]
,
]
Name preset 1 "Security 1".
]
X1)]
Command character is a
period
X1)]
Recall preset 5, which
becomes the current
configuration.
X# X1!]
,
]
Name input 9 "Podium cam".
X@ X1!]
,
]
Name output 1 "Main PJ1".
]
Clear all presets and their
names.
X1)]
Clear preset
X2)]
Delete all members from
group
and soft limits.
]
Reset flash memory
(erase user-supplied files).
]
Resets all processors, level
controls and mixers to default.
]
]
Similar to System Reset,
plus sets the IP address to
192.168.254.254 and the
subnet mask to 255.255.0.0.
DMP 64 • SIS Programming and Control
X1)
.
X2)
, reset parameters
60