Rack Mounting - Extron electronics DMP 64 User Manual

Rack Mounting

For optional rack mounting, do not install the rubber feet. Mount the DMP 64
on a 19" Universal 1U or Basic rack shelf (Extron RSU 129, part #60-190-01; or
Extron RSB 129, part #60-604-02).
To rack mount the DMP 64:
1. If rubber feet were previously installed on the bottom of the DMP 64,
remove them.
2.
Mount the DMP 64 on the rack shelf, using two 4-40 x 3/16 inch screws in
opposite (diagonal) corners to secure the unit to the shelf.
Front false
faceplate
uses 2
screws.
Figure 1.
3.
Install blank panel(s) or other unit(s) on the rack shelf.
HalfRackStandardShelf
1U Universal Rack Shelf
Use 2 mounting holes on
opposite corners.
Mounting the DMP 64 on a Universal Rack Shelf
1/2 Rack Width Front False
Faceplate
(2) 4-40 x 3/16"
Screws
NOTE:
Using screws longer
than 3/16" will damage the
unit and void the warranty.
DMP 64 • Installation 6