Cut, Copy, Or Paste Functions - Extron electronics DMP 64 User Manual

Cut, Copy, or Paste Functions

The user may cut, copy, or paste a GUI processor. These actions can be performed from a
context menu accessed by a right-click of the GUI element, using the Edit menu, or using
the standard Windows keystrokes: <Ctrl+X> = cut; <Ctrl+C> = copy; <Ctrl+V> =
paste.
Multiple GUI elements may be acted upon but the blocks copied must be compatible
with the desired paste blocks. A highlighted group of elements can be cut or copied to a
clipboard. The clipboard contents may then be pasted, but will only succeed if there is an
exact one-to-one relationship between the clipboard contents and the area to be pasted
to.
In the following example, the Mic #1 input signal path is copied to Mic #5. First the
mouse is clicked and dragged across the entire signal path. The selected blocks are
highlighted in green. Press <Ctrl+C>, or use the menu selection to copy
Edit > Copy
the blocks.
DMP 64 • Software Control 84