Special Characters - Extron electronics DMP 64 User Manual

Recall a Preset
The Presets page is used to save new presets created on the Audio Settings page. Presets
saved using this HTML page include only the gain controls on that page, however
presets created using DSP Configurator included all signal processing blocks. If saving
a preset from the HTML page, be certain not to overwrite those presets created by
DSP Configurator.
Figure 75.
To recall a preset to be the current configuration, click the button associated with
the desired preset.
NOTE: When presets are recalled via the HTML page, any signal processing

Special Characters

The HTML language reserves certain characters for specific functions. The device will not
accept these characters as part of preset names, the device's name, passwords, or locally
created file names.
The device rejects the following characters:
{space} + ~ , @ = ' [ ] { } < > ' " semicolon (;) colon (:) | \ and ?.
Presets
adjustments that were saved as part of the preset (under DSP Configurator
control only) are recalled and overwrite the current audio settings.
When a partial preset is recalled, it overwrites that portion of the current
configuration addressed by the preset, leaving the rest unchanged.
DMP 64 • HTML Operation 139