Extron electronics DMP 64 User Manual page 125

3.
To move away from the highlighted block or set of sequential blocks, or to highlight
non-sequential blocks:
After highlighting blocks in step 2, press and hold the Ctrl
a.
the arrow ( ,
,
long as the Ctrl
Ctrl
highlighted. If the block is highlighted, it will be unhightlighted.
Release the Ctrl
b.
4.
To highlight another element or group of elements, repeat steps 2 and 3 as required.
To cut or copy, press the Ctrl+x
5.
To save a preset, press Alt
6.
> Enter
(figure 61) .
Enter
7.
The Save a Preset dialog box appears.
a.
Tab to the preset number field and type a specific preset number.
Tab
b.
Tab to the preset name field and type a preset name.
Tab
NOTE: Unless entering a specific number and/or name, the DSP Configurator
program enters the next sequential unused preset number.
c.
Tab to highlight the
Tab
T
Alt
Figure 61. Saving a Preset using Keyboard Navigation
, and ) key(s) to navigate to the next desired element. As
key is held down, the block moved away from will not be
key, but do not press any arrow keys.
Ctrl
or Ctrl+c
X
Ctrl
> t > right arrow
T
Alt
button and press the Enter
OK
key, then use
Ctrl
key combination.
C
Ctrl
> down arrow
key.
Enter
Enter
DMP 64 • Software Control 119