Extron electronics DMP 64 User Manual page 69

Command/Response table for DSP SIS commands
Command
Audio level control, and mix-point selection
NOTE:
The command format is the same, regardless of the control or mix-point to be set; the acceptable adjustment range
varies depending on the control or mix-point:
• The mic/line input gain range is -18 dB to +80 dB, in 0.1 dB increments.
• The pre-mixer gain range is -100 dB to +12 dB, in 0.1 dB increments.
• The main mix-points range is -35 dB to +25 dB, in 0.1 dB increments.
• The post-mixer trim range is -12 dB to +12 dB, in 0.1 dB increments.
• The output volume range is -100 dB to 0 dB, in 0.1 dB increments.
All responses are shown with the DMP 64 in Verbose mode 2 or 3.
Set a trim or gain (excluding
mic/line inputs)
Example 1 (pre-mixer
gain):
Example 2 (mix-point
gain):
Set a mic/line gain
Example:
Read a trim or mix
(excluding mic/line inputs)
Example 1
(post mixer gain control):
Example 2 (mix control):
Read a mic/line gain
Example:
Audio mute
NOTE: • The post-mixer trim cannot be muted.
• All responses are shown with the mixer device in Verbose mode 2 or 3.
Audio mute
Example:
Audio unmute
Read audio mute or level
X6)
NOTE: = Audio level control, or mix-point select
X6!
= Level value; mix-point or post-mixer trim
X6@
= Mic/line gain level value
X6#
= Level value; pre-mixer gain and output volume
X6$
= Mute status
ASCII command Response
(host to device) (device to host)
E X6) X6! }
G * AU DsG
E }
G40105*2040AU DsG40105*2040
E }
G20001*2213AU DsG20001*2213
E X6) X6@ }
G * AU DsG
E }
G40001*2288AU DsG40001*2288
E X6) }
G AU DsG
E }
G60101AU DsG60101*2103
E }
G20203AU DsG20203*2140
E X6) }
G AU DsG
E }
G40000AU DsG40000*2598
E X6) }
M *1AU DsM
E }
M20301*1AU DsM20301
E X6) }
M *0AU DsM
E X6) }
M AU DsM
Additional
description
X6) X6!]
Set trim or mix control
*
a value of
]
Set the #6 pre-mixer gain to a
value of -0.8 dB.
]
Mix +16.5 dB of mic 1 into
output 2.
X6) X6@]
Set mic/line gain control
*
to a value of
]
Set the mic/line input 2 gain
to a level of +24.0 dB.
X6) X6!]
DSP trim or mix control
*
set to a value of
]
Output 2, post mixer trim is
set to a value of +5.5 dB.
]
+9.2 dB of mic 3 is mixed into
output 4.
X6) X6@]
* Mic/line gain control
set to a value of
]
Mic/line input 1 gain is set to
a value of +55.0 dB.
X6) ]
1 Mute audio point
*
]
Mute mix-point input 4 to
* 1
output 2.
X6) ]
* 0 Unmute audio point
X6) X6$] X6$
: 0 = mute off, 1 = mute on.
*
See the tables on page 74.
See the table on page 75 through 77.
See the table on page 78 through 81.
See the table on page 82 through 85.
0 = unmute 1 = mute
DMP 64 • SIS Programming and Control
X6)
to
X6!
dB.
X6)
X6@
dB.
X6)
is
X6!
dB.
X6)
is
X6@
dB.
X6)
.
X6)
.
63