Filter - Extron electronics DMP 64 User Manual

Filter

Each mic/line input channel filter block allows a total of five
filters. The first filter is inserted from a processor list that
appears when the block is double-clicked or via a context
window/processor list when the block is right-clicked. After
the processor is inserted, a double-click opens the setup
dialog box.
Figure 14.
Additional filters are inserted by opening the filter block dialog box, then selecting a filter
type from the drop-down filter selection list. All filter parameters are modified via the
Filter block dialog box. Each filter loads with all applicable default parameters displayed to
the right of each drop-down filter selection list.
Figure 15.
Within the dialog box, a filter is focused when a filter type is inserted, or is focused by
clicking the filter number to the left of the filter selection drop-down list. Note how box
#3 in figure 15 is highlighted in yellow, indicating it is the filter in focus. The results of
the filter in focus (independent of other filters) will show in the graph as a dotted line the
same color as its filter row when bypassed. When active (not bypassed), the line is solid.
Filter Block Dialog Box
Filter Dialog Box, Filters Added
DMP 64 • Operation 20