Extron electronics DMP 64 User Manual page 124

• Shift-Tab key combination —
Reverses the direction of the Tab key function.
•
Arrow ( , , , and
Navigate up, down, left, and right within any of the areas outlined in figure 62.
• Enter Key — Performs the same action as a mouse double-click. For
example, opens the context menu from which a processor type may be selected
or opens a dialog box when applicable. When an action button is highlighted, Enter
executes the button action and toggles the button when applicable.
• Control key — The Ctrl key can be used in the following shortcuts.
<Ctrl+x> — Cut the selected elements.
о
<Ctrl+c> — Copy the selected elements.
о
<Ctrl+v> — Paste the selected elements from a previous cut or copy.
о
<Ctrl+a> — The first press of the Ctrl+a combination highlights all A/V matrix
о
block nodes.
• Alt key — The Alt key is used with specific letter keys to open and navigate task bar
menus. When the Alt key is pressed and released, the File menu opens. When the
Alt key is pressed and held, the first letters in the menu titles (File, Edit, View, Tools,
Window, or Help) become underlined. Press the underlined letter key to open that
menu.
•
Once a task bar menu is open, use the up and down arrow keys to move up and
down in the menu or submenu, use the right key to open a submenu (if applicable),
and use the Esc key to back out of an active menu or submenu.
DSP Configurator-unique Navigation
Highlighting and marking items, cutting or copying, saving a preset:
When an item within the program is selected, it is highlighted by a green boundary box.
One or more highlighted items can be cut, copied, pasted, or saved as a preset. The cut,
copy, and paste functions can be performed using the task bar menus (see the Alt
above) or the shortcuts described on the previous page.
NOTE: When an item is cut, it is not removed from its original location until it has
been pasted in its new location.
Highlight multiple elements for cut, copy, paste, or a preset as follows:
1.
Use the arrow ( , ,
2. To highlight a block:
a. Press and hold the Shift
to navigate away from the selected block.
b.
To highlight additional sequential blocks, continue to hold the Shift
then use the arrow ( ,
block. Additional blocks will be highlighted as long as the Shift
When the last element is highlighted, move the highlight box one additional
block, then release the Shift
) keys —
, and ) key(s) to move to the first block to be highlighted.
key, then use the arrow ( ,
Shift
, , and ) key(s) to navigate away from the selected
key.
Shift
Alt
, , and ) key(s)
key,
Shift
is pressed.
Shift
DMP 64 • Software Control
key,
118