Extron electronics DMP 64 User Manual page 140
Digital matrix processor
Hide thumbs
Also See for DMP 64:
- User manual (146 pages) ,
- Setup manual (2 pages) ,
- Setup manual (2 pages)
Table of Contents
Advertisement
7.
Click
( g in figure 70 on previous page). The program extracts and places the
Next
firmware files in a folder identified in the InstallShield Wizard window.
NOTE: Write down the folder where the firmware file is saved.
8.
Click
Finish
( h in figure 70) to exit the program.
9.
Connect the PC to the device via the Ethernet port.
10.
Access the device using the HTML pages (see
11.
Click the
Configuration
12.
Click the
Firmware Upgrade
13.
Click the
Browse
button. An open file window appears.
14.
Navigate to the folder where the firmware upgrade file was saved. Select the file.
NOTE: Valid firmware files must have the file extension '.S19'. Any other file
extension is not a firmware upgrade. The original factory-installed
firmware is permanently available on the device. If the attempted
firmware upload fails for any reason, the device automatically reverts to
the factory-installed firmware.
15.
Click the
button.
Open
16.
Click the
button. The firmware upload to the device may take a few minutes.
Upload
Download the Startup Page
tab.
link.
.)
DMP 64 • HTML Operation
134
Advertisement
Table of Contents
