Configuration Tab; System Settings Page - Extron electronics DMP 64 User Manual

Configuration Tab

System Settings Page

Click the
The screen consists of fields to view and edit IP administration and system settings.
Passwords
on the left. See
subnetting.
Figure 65.
On password-protected connections, there are two levels of protection: administrator and
user. Administrators have full access to the Passwords and Firmware Upgrades pages.
Users have view only access.
•
•
IP Settings Fields
The IP settings fields provide a location for viewing and editing settings unique to the
Ethernet interface. After editing any of the settings on this page, click the
at the bottom of the section.
Unit Name Field
The unit name field contains the name of the device. This name field can be changed to
any valid name, up to 24 alphanumeric characters.
NOTE: The following characters are invalid in the matrix name:
tab to download the System Settings page (figure 65).
Configuration
and
Firmware Upgrade
Ethernet (LAN)
System Settings Page
Ethernet connection to the device, either entering SIS commands (see
Programming and Control) or using the Extron DSP Configurator Program (see
Software) is password protected.
Connection via any RS-232 port is not password protected.
+ ~ , @ = ' [ ] { } < > ' " ; : | \ and ?.
pages are accessed by clicking the appropriate link
Port, for basic information about IP addresses and
DMP 64 • HTML Operation
SIS
DMP
button
Submit
127