Operation
This section describes the the operation of the DMP 64, including:
•
•
•
•
•
•
•
•
•
•
DMP 64 Operation
The DMP 64 does not have physical controls. Configuration and operation are
accomplished using a PC running Windows XP or better and the DSP Configurator
software (available on the included disc or at www.extron.com), an embedded web
page using Windows Internet Explorer, or the Extron SIS
hyper-terminal or DataViewer.
There are several front and rear panel operational indicators outlined in the following
pages.
DMP 64 Operation
Front Panel Operation
Rear Panel Operation
DSP Processing/Signal Flow
Processor Blocks
Mic/Line Input Channel
Virtual Bus Returns
Primary Mix Matrix
Secondary Mix Matrix
Line Output Channels
Simple Instruction Set using
™
DMP 64 • Operation
12