Basic Sis Commands - Extron electronics DMP 64 User Manual

Although the DMP 64 uses the same structure for SIS commands, there are two variations.
One is the global command structure noted above and documented in the
Response Table for Basic SIS Commands
The second set of tables, "DSP SIS commands" uses the command structure outline
beginning with
the same structure of basic SIS commands, they differ in how the software addresses the
individual processor blocks within the DMP 64.
Generally the basic SIS commands will be used for global configuration such as setting
IP addresses, date/time, while the Audio SIS commands allow functionality of the audio
signal chain.
Command/Response Table for Basic SIS Commands
Command
Information requests
Firmware Version
Firmware and build version
Kernel firmware and build
Verbose version info
Firmware version
Bootstrap Version
Factory Firmware Version
Updated firmware version
NOTE: An asterisk (*) after the version number indicates the currently running version. Question marks (?.??) indicate
that only factory firmware is loaded. A caret (^) indicates the firmware version that should be running, but a Mode
1 reset was executed and the default factory firmware is running. An exclamation point (!) indicates corrupted
firmware.
Query part number
Query model name
Query model name
Query model description
Query system memory
usage
Query user-memory usage
X1!
NOTE: = Version number
Command/Response Tables for DSP SIS
ASCII command URL Encoded
(host to device) (web)
Q *Q
*Q *Q
**Q **Q
0Q 0Q
1Q 1Q
2Q 2Q
3Q 3Q
4Q 4Q
N N
I I
1I 1I
2I 2I
3I 3I
4I 4I
Firmware version number to second decimal place (x.xx)
Version and Build number adds four digits (x.xx.xxxx)
to the Version number
that follows.
Commands. While using
Response
(device to host)
X1!]
X1!]
X1!]
]
Sum of 2Q-3Q-4Q
X1!]
X1!]
X1!
plus web ver.-desc-UL
]
date/time
X1!
plus web ver.-desc-UL
]
date/time
]
60-1054-01
]
V00x00•A06x04
]
DMP•64
Digital•Matrix•Processor
#Bytes used out of #KBytes
#Bytes used out of #KBytes
DMP 64 • SIS Programming and Control
Command/
]
]
]
55