Extron electronics DMP 64 User Manual page 110

Deleting a Group Master
To delete a group:
1.
Click
Tools | Configure Groups
or click View | Group Controls
2. In the drop-down box, click a numbered group (such as "Group #1") to
Select Group
select it.
3.
Click Delete Current Group
4.
Click in the
Yes Confirm Deletion
Viewing and Using a Group Master
Click
View > Group Controls
displays all current group master controls. This window can be resized for convenience.
The group controls dialog contains two menu items:
Add a Group Tools
Figure 53. Group Controls Dialog Box
•
Slide a group fader up and down to adjust all gain controls in the group.
•
Click and drag a soft limit ( ) to set the ceiling and/or floor for the group.
NOTE: The soft limits cannot be dragged beyond the current setting of the group
fader.
Add a Group
To launch the configure groups dialog from the group controls window, click
Add a Group . When a new group is added and the
the group controls window refreshes to display the added control.
•
Click the button in a mute group to mute or unmute all blocks in the group.
Mute
NOTE: If a block is muted, that block remains muted when the group mute is
released.
to open the configure groups dialog box
and then click Add a Group
button in the lower left area.
dialog box.
to open the group controls dialog box (figure 53) which
Add New Group
DMP 64 • Software Control
.
dialog is closed,
104