Date And Time - Planet Networking & Communication LCG-300 Series User Manual

4.11.2

Date and Time

This section assists you in setting the system time of the LoRaWAN Gateway. You are able to either
select to set the time and date manually or automatically obtain the GMT time from Internet as shown in
Figure 4-11-3.
Object
Current Time
Time Zone Select
NTP Client Update
NTP Server
Figure 4-11-3: Date and Time
Show the current time.
User is able to set time and date manually.
Select the time zone of the country you are currently in. The LoRaWAN
Gateway will set its time based on your selection.
Once this function is enabled, LoRaWAN Gateway will automatically
update current time from NTP server.
User may use the default NTP sever or input NTP server manually.
- 122 -
Industrial LoRaWAN Gateway
Description
LCG-300 series