Installing A Sas Raid Controller - Fujitsu PRIMERGY CX272 S1 Upgrade And Maintenance Manual
Server node
Hide thumbs
Also See for PRIMERGY CX272 S1:
Table of Contents
Advertisement
Expansion cards
6.4.1.4
Installing a SAS RAID controller
Ê Remove the SAS RAID controller from its protective packaging.
I
For further instructions regarding controller settings, please refer to
the accompanying documentation.
Ê If applicable, attach the required slot bracket to the SAS RAID controller as
described in section
Figure 69: Installing a SAS RAID controller (A)
Ê Carefully insert the expansion card into the PCI slot (2) and press it
firmly (1).
I
For slot preferences, please refer to section
page
94.
128
"Mounting expansion card slot brackets" on page
Upgrade and Maintenance Manual
"Basic information" on
CX272 S1
96.
Advertisement
Table of Contents
