Installing Expansion Cards - Fujitsu PRIMERGY CX272 S1 Upgrade And Maintenance Manual

6.3.1.3

Installing expansion cards

Ê Remove the expansion card from its protective packaging.
I
For further instructions regarding controller settings, please refer to
the accompanying documentation.
Ê If applicable, attach the required slot bracket to the expansion card as
described in section
I
Only install an expansion cards without SAS connector.
Ê If applicable, reinstall SFP+ transceiver modules on the new expansion
card, as described in section
page 103.
Figure 62: Installing expansion cards (A)
Ê Carefully insert the expansion card into the PCI slot (2) and press it
firmly (1).
I
For slot preferences, please refer to section
page 94.
CX272 S1
"Mounting expansion card slot brackets" on page
"Installing SFP+ transceiver modules" on
Upgrade and Maintenance Manual
Expansion cards
"Basic information" on
96.
115