Ê If the slot bracket on the defective expansion card is to be reused, remove it
from the board as described in section
brackets" on page
6.3.3.3
Installing an expansion card
Ê Install the new expansion card as described in section
cards" on page
Ê If applicable, install a slot bracket on the new expansion card as described
in section
"Mounting expansion card slot brackets" on page
Ê If applicable, reinstall SFP+ transceiver modules on the new expansion
card, as described in section
page
103.
Ê If applicable, connect internal cables to the expansion card.
I
For a complete cabling overview, please refer to section
overview" on page
CX272 S1
96.
113.
"Installing SFP+ transceiver modules" on
221.
Upgrade and Maintenance Manual
"Mounting expansion card slot
"Installing expansion
Expansion cards
96.
"Cabling
121