Fujitsu PRIMERGY CX272 S1 Upgrade And Maintenance Manual page 95

Expansion card overview
Expansion cards
SAS 6Gb/sec (PSAS CP200i)
FC Ctrl 1x 8Gb (LPe1250)
FC Ctrl 2x 8Gb (LPe12002)
2x 10 Gbit CNA dual port SFP+ (Emulex OCe
10102)
Eth Ctrl 2x1Gb Cu PCIe x4 D3035
Eth Ctrl 4x1Gb Cu PCIe x4 D3045
10 Gbit Ethernet Controller dual port SFP+ (D2755)
SFP+ Module MMF 10GbE LC for D2755
IB HCA 40Gb 1 and 2 port QDR*
IB HCA 56Gb 1 and 2 port FDR*
8GBit/s FC Controller; 1 channel; QLE2560, low
profile bracket*
8GBit/s FC Controller; 2 channel; QLE2562, low
profile bracket*
PCIe-SSD 785GB MLC; PCIe x4, Low Profile*
PCIe-SSD 1.2TB MLC; PCIe x4, Low Profile*
Eth Ctrl 2x10GBase-T PCIe x8 X540-T2
Table 6: Expansion card slot sequence
*: as soon as available
I
Note on installation sequence: Expansion cards are equipped according
to their position in the table, from top to bottom row.
I
For the latest information on supported expansion cards, refer your
server's hardware configurator available online at the following address:
for the EMEA market:
http://ts.fujitsu.com/products/standard_servers/tower/primergy_cx272s1.html
for the Japanese market:
http://jp.fujitsu.com/platform/server/primergy/system/
CX272 S1
Model
Upgrade and Maintenance Manual
Expansion cards
Preferred slot
Max 1 2
1 x
1
1
1
1
1
2 x
1
1
1
1
1
1
2 x
3
x
x
x
x
x
x
x
x
x
x
x
x
x
95