6.3.1
Installing expansion cards
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
6.3.1.1
Preliminary steps
Perform the following steps:
"Disabling SVOM boot watchdog functionality" on page 75
Ê
Ê Locate the desired server node with the ID button.
"Shutting down the server node" on page 41
Ê
"Removing the server node from the Dual Node Cluster Server" on page 42
Ê
"Removing the riser module" on page 68
Ê
"Removing SAS RAID controller" on page 130
Ê
CX272 S1
Upgrade and Maintenance Manual
Expansion cards
Hardware: 5 minutes
Software: 5 minutes
(if applicable)
113