Enabling Boot Watchdog Functionality - Fujitsu PRIMERGY CX272 S1 Upgrade And Maintenance Manual

Basic software procedures
Ê From the Select Product drop down lists, choose your PRIMERGY server or
enter its serial or ident number into the search field.
Ê Select your operating system and version.
Ê Select the desired component type (e.g. SAS RAID).
Ê Select your controller from the device list to expand a compilation of
available drivers and firmware.
Ê Select the desired file and click Download for further instructions.
5.2.3

Enabling boot watchdog functionality

If ServerView Operation Manager boot watchdog functionality has been
disabled for firmware upgrade purposes (see section
watchdog functionality" on page
maintenance task.
Timer settings can be configured in the BIOS.
Configuring boot watchdog settings in the BIOS
Ê Enter the BIOS.
Ê Select the Server Mgmt menu.
Ê Under OS Watchdog Timer select the Enabled setting.
Ê Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify settings,
refer to the "System Board D3306 BIOS Setup Utility" reference manual.
Configuring boot watchdog settings using the BMC web frontend
Ê Enter the BMC web frontend.
Ê Select the Server Management menu.
Ê Under Watchdog Settings ensure that the check box next to Boot Watchdog is
selected. From the drop down list choose Reset and specify the desired
timeout delay.
Ê Click Apply for the changes to take effect.
82
75), it has to be re-enabled to complete the
Upgrade and Maintenance Manual
"Disabling SVOM boot
CX272 S1