Installing A Memory Module; Concluding Steps - Fujitsu PRIMERGY CX272 S1 Upgrade And Maintenance Manual

7.2.2

Installing a memory module

Figure 81: Installing memory modules (A)
Ê Press out the securing clip at each end of the memory module connector.
Figure 82: Installing memory modules (B)
Ê Press down on the memory module until the securing clips snap into the
cutouts at each end of the module.
V
CAUTION!
Install dummy modules in not used memory slots.
7.2.3

Concluding steps

Perform the following steps:
"Installing the memory slot air ducts" on page 45
Ê
"Installing the air duct brackets" on page 47
Ê
"Installing the air duct" on page 49
Ê
"Installing the server node in the Dual Node Cluster Server" on page 72
Ê
Ê If applicable, reconnect all external cables.
CX272 S1
Upgrade and Maintenance Manual
Main memory
149