Installing The System Board - Fujitsu PRIMERGY CX272 S1 Upgrade And Maintenance Manual

System board and components
Ê Carefully shift the system board in the direction of the arrow until the plug
shells disengage from the cut-outs in the connector panel (2).
Ê Hold the defective system board by the memory module ejectors and at a
slight angle lift it out of the chassis.
9.3.2.2

Installing the system board

Figure 119: Installing the system board (A)
Ê Hold the new system board by the memory module ejectors.
V
CAUTION!
– Do not lift or handle the system board by any of its heat sinks!
– Ensure not to damage the EMI springs to comply with applicable
EMC regulations and satisfy cooling requirements and fire
protection measures.
Ê At a slight angle, lower the system board into the chassis (1).
Ê Carefully shift the system board in the direction of the arrow until the plug
shells engage with the cut-outs in the connector panel (2).
Ê Lower the system board down.
202 Upgrade and Maintenance Manual
CX272 S1