Expansion cards
6.4.2
Removing SAS RAID controller
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
6.4.2.1
Preliminary steps
Before removing an expansion card, perform the following steps:
"Disabling SVOM boot watchdog functionality" on page 75
Ê
Ê Locate the desired server node with the ID button.
"Shutting down the server node" on page 41
Ê
Ê If applicable, remove all external cables from the server node.
"Removing the server node from the Dual Node Cluster Server" on page 42
Ê
"Removing the riser module" on page 68
Ê
130
Upgrade and Maintenance Manual
Hardware: 10 minutes
Software: 5 minutes
CX272 S1