Expansion cards
Ê Install the new SAS RAID controller as described in section
RAID controller" on page
6.4.3.4
Concluding steps
Perform the following steps:
Ê Installing the 3-pin cable onboard.
"Installing the riser module" on page 70
Ê
"Installing the server node in the Dual Node Cluster Server" on page 72
Ê
Ê Reconnect all external cables.
"Switching on the server node" on page 73
Ê
"Updating RAID controller firmware" on page 83
Ê
"Enabling boot watchdog functionality" on page 84
Ê
136
124.
Upgrade and Maintenance Manual
"Installing SAS
CX272 S1