6.3.2
Removing expansion cards
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
6.3.2.1
Preliminary steps
Perform the following steps:
Ê Locate the desired server node with the ID button.
"Shutting down the server node" on page 41
Ê
Ê Remove all external cables from the server node.
"Removing the server node from the Dual Node Cluster Server" on page 42
Ê
"Removing the riser module" on page 68
Ê
"Removing SAS RAID controller" on page 130
Ê
CX272 S1
Upgrade and Maintenance Manual
Expansion cards
Hardware: 5 minutes
Software: 5 minutes
(if applicable)
117