Checking The Transmission Conditions (Tx Report) - Konica Minolta bizhub 362 User Manual

Reports and lists
11 Reports and lists
11.1

Checking the transmission conditions (TX Report)

The transmission report (TX Report) shows the document number, start date
and time of the transmission, duration of the transmission, destination,
mode, number of pages transmitted, transmission results, and transmission
volume. According to the factory setting, the machine is set to automatically
print a report after every 50 transmissions. The method for manually printing
a report is described below.
!
Detail
To change the report-related settings, refer to User manual [Copy
Operations].
Note
If bit 6 of mode 477 is set to "1" in the Software Switch Setting screen,
reports can be printed with "Print Lists" in the Administrator Management
1 screen. For details, refer to "Specifying software switch settings
(machine functions)" on page 10-28.
bizhub 362/282/222
11
11-3