9
9.16
LDAP (Administrator mode)
The settings used by the LDAP (Lightweight Directory Access Protocol)
server in a network can be specified.
Settings can be specified for the following.
Item
LDAP
Search Default
Setting
Specifying the LDAP settings
1
In the Administrator mode, click the Network tab.
–
For the procedure to log on to Administrator mode, refer to
"Logging on to Administrator mode" on page 9-11.
2
Click [Common Setting], then [LDAP].
3
Select whether to enable or disable LDAP searches, and then click
[Apply].
9-70
Specifying settings using PageScope Web Connection
Description
Select whether to enable or disable address searches where the LDAP server
is used. If "Enable" is selected, the LDAP server can be specified.
Select which of the registered LDAP servers is to be accessed. This parame-
ter appears if an LDAP server has been registered.
bizhub 362/282/222