Specifying The Processing Of Documents Received On Other Lines - Konica Minolta bizhub 362 User Manual

Specifying management settings

Specifying the processing of documents received on other lines

You can specify the processing method for documents received on lines
other than a port.
The following settings can be specified.
Item
RX Doc. Settings
Forwarding Dest
Note
If bit 7 of mode 306 is set to "1" in the Soft SW Setting screen, only "Port"
is available. For details, refer to "Specifying software switch settings
(machine functions)" on page 10-28.
bizhub 362/282/222
Description
When "Distribution Conditions" is set to "Specified", select the
processing method for the received document.
Print: Prints the document.
Forward: Forwards the data to the specified destination.
Print and Forward: Prints the document and at the same time
forwards the data to the specified destination.
Memory RX: Receives the memory by force.
Specify the forwarding destination if "Forward" is selected in the
Setting of RX Doc. screen.
Touch [Next Destination], touch the button for the recipient's
address, and then touch [Enter].
10
10-25