Specifying The Address Of The Forwarding Destination - Konica Minolta bizhub 362 User Manual

Specifying settings using PageScope Web Connection

Specifying the address of the forwarding destination

1
In the Administrator mode, click the Scan tab.
– If the optional fax kit has been installed, click the Fax/Scan tab.
– For the procedure to log on to Administrator mode, refer to
"Logging on to Administrator mode" on page 9-11.
2
Click [TX Document].
3
Select the address of the forwarding destination. Click [Select
Forwarding Destination].
The list of one-touch dial destinations appears.
4
Select the address of the forwarding destination, and then click [Apply].
– Only one address can be selected.
5
Click [Apply].
bizhub 362/282/222
9
9-57