Specifying Whether To Enable Access Locks, And Whether To Enable The Password Rules (Mode 469) - Konica Minolta bizhub 362 User Manual

Specifying management settings
Specifying whether to enable access locks, and whether to enable the
password rules (mode 469)
Specify whether to lock access if the password is entered incorrectly, and
specify whether to apply the password rules.
Factory settings
Bit
Setting
Specifying settings
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
Bit
7
6, 5
4
3, 2, 1, 0
Note
For the Access Lock function, refer to User manual [Copy Operations].
If applying a password rule, the conditions that are required in the
password are described below.
8 alphanumeric characters (only 8 alphanumeric character for the
administrator password, and 8 alphanumeric characters or more for the
user authentication user password)
Only passwords with the same characters are not allowed.
Passwords that do not meet the password rule are not accepted. For the
password rules, refer to User manual [Copy Operations].
bizhub 362/282/222
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description Setting
Specify whether to 0
lock access when a
1
password (account
track and administra-
tor passwords) is en-
tered incorrectly three
times.
--------------------- 00
For security, specify 0
whether to apply a
password rule.
1
--------------------- 0000
Description
Does not lock access
Locks access
* Do not change these bits
when specifying settings
for this function.
Do not apply a password
rule
Apply a password rule
* Do not change these bits
when specifying settings
for this function.
10
Page
Refer-
ence
----------
----------
----------
----------
10-51