Specifying settings using PageScope Web Connection
Com. Mode
Select whether or not each communication mode can be used.
1
In the Administrator mode, click the Scan tab.
–
If the optional fax kit has been installed, click the Fax/Scan tab.
2
Click [TX Settings].
3
Click [Com. Mode].
4
Specify a setting for each parameter, and then click [Apply].
–
If mode 476 of the software switch settings was changed, only
communication modes that can be selected appear. For details,
refer to "Specifying software switch settings (machine functions)"
on page 10-28.
Note
The communication modes that can be set differ depending on the
options that are installed.
bizhub 362/282/222
9
9-51