Scan Setting (Administrator Mode) - Konica Minolta bizhub 362 User Manual

9
9.10

Scan Setting (Administrator mode)

The device name of this machine used in the file name and the transmission
of the scanned data can be specified.
Settings can be specified for the following.
Item
Machine Name
Division by
Page
Division by Size
Size of Division
Interval of Divi-
sion Transmis-
sion
E-mail Mode
TX Quality
(Max.)
TX Size (Max.)
Coding Method
Scan Mode
B/W: File Type
B/W: Coding
Method
9-54
Specifying settings using PageScope Web Connection
Description
Enter the device name of this machine that is used for the file name. Up to 16
characters can be entered.
Applied when performing the Scan to E-Mail or Internet fax operation.
Select whether the data is divided by page when scanned data is sent.
Applied when performing the Scan to E-Mail operation.
Select whether the data is divided by a fixed size when scanned data is sent.
Note
Depending on the e-mail software used by the recipient, the bi-
nary division ("Division by Size") may not be available.
When "Division by Size" is set to "On", type in the size of the data sections
(between 16 and 2000 KB)
When "Division by Size" is set to "On", type in the number of seconds (be-
tween 1 and 255) for the interval when the divided data is sent.
Select the maximum resolution ("200 dpi", "400 dpi" or "600 dpi") for the data
to be sent as an Internet fax.
Select the maximum document size ("Letter", "Legal" or "11*17") for the data
to be sent as an Internet fax.
Select the coding method ("MH", "MR" or "MMR") for the data to be sent as
an Internet fax. The data amount for the coding methods increase as follows:
MMR, MR, MH.
Select the format ("TIFF" or "PDF") of the data that is to be saved when per-
forming the Scan to E-Mail, Scan to FTP, Scan to SMB, or Scan to HDD op-
eration.
If "TIFF" was selected, the setting changes to "Multi Page TIFF" with the Scan
to FTP, Scan to SMB or Scan to HDD operation.
Select the coding method ("MH" or "MMR") for the data to be sent when per-
forming the Scan to E-Mail, Scan to FTP, Scan to SMB, or Scan to HDD op-
eration. The data amount with the MMR coding method is less than with the
MH method.
bizhub 362/282/222