Resending - Konica Minolta bizhub 362 User Manual

6
No. Item
1 Report output date and time
2 Transmission source infor-
mation (TSI)
3 Transmission information
4 Transmission result
5 Transmission image

Resending

You can resend up to 20 failed transmissions.
1
Touch [Job List], then [Type], and then select the document that could
not be sent.
– If [Retry] and [Change Destination] appear in the screen, the
document does not need to be scanned again.
2
To send to the same destination, touch [Retry].
– To send to a different destination, touch [Change Destination].
6-24
Description
Shows the date and time that the report was printed.
Shows the registered transmission source name.
Shows the document number, the duration of the
transmission, and the transmission mode.
Shows the transmission result. Any of the following
may appear.
OK: The transmission was completed successfully.
INTERR: The transmission was interrupted.
F. MEM: The memory capacity was exceeded.
NG: The transmission failed.
PT. DEL: The transmission to some destinations failed.
Error code: For details, refer to "Network error list" on
page 12-4.
Shows a part of the sent image.
Scan to SMB
bizhub 362/282/222