9
5
Select the communication mode, and then click [Next].
–
If mode 476 of the software switch settings was changed, only
communication modes that can be selected appear. For details,
refer to "Specifying software switch settings (machine functions)"
on page 10-28.
6
Specify settings for the parameters in the page for the selected
communication mode.
–
To also register the secondary recipient, specify settings for the
parameters, and then click [Sub Address Registration].
–
For details on the parameters, refer to "One-Touch Key Registration
(User mode)" on page 9-14.
7
Click [Apply].
The one-touch dial destination is registered.
9-24
Specifying settings using PageScope Web Connection
bizhub 362/282/222