Specifying Chain Dialing - Konica Minolta bizhub 362 User Manual

4

Specifying chain dialing

If the destination address is longer than 64 characters, the address can be
specified by combining addresses registered to one-touch dial buttons and
an entered address.
Touch [Chain], and then select one-touch dial buttons or enter an address.
!
Detail
Chain dialing can only be used with one
destination per transmission.
With chain dialing, the address can
contain up to 192 digits (64 characters
from a one-touch dial button + 64
characters from a one-touch dial
button + 64 characters from an entered
address).
The one-touch dial buttons to be used with chain dialing must be
programmed in advance.
4-10
Scan to E-Mail
bizhub 362/282/222