Specifying settings using PageScope Web Connection
Specifying the POP3 settings
1
In the Administrator mode, click the Network tab.
–
For the procedure to log on to Administrator mode, refer to
"Logging on to Administrator mode" on page 9-11.
2
Click [E-Mail/Internet FAX], then [POP3].
3
Specify a setting for each parameter, and then click [Apply].
4
Click [OK].
5
If the setting of a parameter marked with [*] is changed, turn this
machine off, then on again.
bizhub 362/282/222
9
9-79