Changing The Settings Of The Fax Program - Konica Minolta bizhub 362 User Manual

9

Changing the settings of the fax program

1
Click the Scan tab.
– If the optional fax kit has been installed, click the Fax/Scan tab.
2
Click [FAX Program Registration].
3
From the "Index" list, click the index that contains the fax program that
is to be changed.
The one-touch dial destinations saved in the selected index appear in
the lower half of the page.
4
Click the fax program that is to be changed.
– A one-touch dial destination other than a fax program cannot be
selected, even if it is clicked.
5
Specify settings for the program parameters.
– For details on the parameters, refer to "FAX Program Registration
(User mode)" on page 9-33.
6
Click [Apply].
9-38
Specifying settings using PageScope Web Connection
bizhub 362/282/222