Specifying The Transmission Interval When E-Mail Messages Are Separated (Mode 372) - Konica Minolta bizhub 362 User Manual

10
Specifying the transmission interval when e-mail messages are
separated (mode 372)
You can specify the transmission interval when e-mail messages are
separated.
Factory settings
Bit
Setting
Specifying settings
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
Bit
7, 6, 5, 4,
3, 2, 1, 0
(*)
Settings between "0000 0001 (HEX: 01) 1 second" and "1111 1111 (HEX:
FF) 255 seconds" can be specified. When specifying the value, refer to the
HEX selection table.
10-46
7 6 5 4 3 2 1 0
0 0 0 0 1 1 1 1 (HEX: 0F)
Description
Specifies the transmis-
sion interval when email
messages are separat-
ed.(*)
Specifying management settings
Setting Description
00000101 5 seconds
00001010 10 seconds
00001111 15 seconds
00011110 30 seconds
00111100 60 seconds
01011010 90 seconds
01111000 120 seconds
10010110 150 seconds
10110100 180 seconds
11010010 210 seconds
11110000 240 seconds
00000000 *Do not specify this status.
Page Ref-
erence
page 3-35
bizhub 362/282/222