Replacing Mezzanine Cards; Required Tools; Preliminary Steps - Fujitsu PRIMERGY BX924 S3 Upgrade And Maintenance Manual

Mezzanine cards
7.4

Replacing mezzanine cards

Upgrade and Repair Units (URU)
Average hardware task duration: 5 minutes
Average software task duration: 5 minutes
7.4.1

Required tools

Preliminary and concluding steps: tool-less
●
Replacing expansion cards: tool-less
●
7.4.2

Preliminary steps

V
Note on network settings recovery
When replacing network controllers or onboard CNA, network
configuration settings in the operating system will be lost and replaced
by default values. This applies to all static IP address and LAN teaming
configurations.
Ensure to note down your current network settings before replacing the
controller.
Before replacing an mezzanine card, perform the following steps:
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Disable boot watchdog functionality as described in section
watchdog functionality" on page
Ê If applicable, open the rack door as described in section
door" on page
Ê Locate the defective server blade as described in section
defective server blade" on page
152
73.
53.
Upgrade and Maintenance Manual
74.
45.
"Disabling BitLocker
"Disabling boot
"Opening the rack
"Locating the
BX924 S3