Updating Or Recovering The Irmc - Fujitsu PRIMERGY BX924 S3 Upgrade And Maintenance Manual

Ê Open the server blade as described in section
on page 60.
Ê Turn switch 3 of the user DIP switch bank to OFF, see section
settings" on page
Ê Close the server blade as described in section
page 61.
Ê Reinstall the server blade in the system unit as described in section
"Installing the server blade in the system unit" on page
Ê Switch on the server blade as described in section
blade" on page
Ê You can now put the server blade back into operation.
5.2.1.2

Updating or recovering the iRMC

TFTP update procedure
Ê Login to the management blade web interface.
Ê Open the Information / Operation – Operation – Firmware Update menu.
Ê Open the Server Blade iRMC tab.
Ê In the Server Blade iRMC box enter the TFTP IPv4 or IPv6 address of the
TFTP server and the pathname of the TFTP firmware file.
Ê Select the desired server blade and click the > button to move it to the
update window.
I
For more detailed information, refer to the Help – On Page function of
the management blade web interface.
Ê Click the Apply button to start the update process.
The Update Progress History box provides information on the update
progress.
V
CAUTION!
Do not interrupt the iRMC upgrade process after it has started. If the
process is interrupted, the iRMC may be permanently corrupted.
BX924 S3
283.
65.
Upgrade and Maintenance Manual
Basic software procedures
"Opening the server blade"
"Onboard
"Closing the server blade" on
62.
"Switching on the server
83