Removing The Ufm - Fujitsu PRIMERGY BX924 S3 Upgrade And Maintenance Manual

Ê Remove the server blade from the system unit as described in section
"Removing the server blade from the system unit" on page
Ê Open the server blade as described in section
on page 60.

10.2.3.3 Removing the UFM

Figure 107: Removing the UFM
Ê Grasp the UFM on its corners (see arrows), then pull it out gradually and
carefully.
The UFM spacer remains on the system board.
BX924 S3
Upgrade and Maintenance Manual
System board components
59.
"Opening the server blade"
247