Concluding Steps - Fujitsu PRIMERGY BX924 S3 Upgrade And Maintenance Manual

9.4.4

Concluding steps

Perform the following procedures to complete the task:
Ê Install the processor heat sink onto the processor as described in section
"Installing processor heat sinks" on page
Ê If memory modules have been removed, install the memory into their original
location as described in section
Ê Close the server blade as described in section
page 61.
Ê Reinstall and secure the server blade in the system unit as described in
section "Installing the server blade in the system unit" on page
Ê If applicable, close the rack door as described in section
door" on page
Ê If available, update the system board BIOS and the iRMC to the latest
version as described in section
BIOS and iRMC" on page
Ê Enable the the replaced processor as described in section
replaced components in the system BIOS" on page
Ê Enable boot watchdog functionality as described in section
watchdog functionality" on page
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
BX924 S3
"Installing a memory module" on page
67.
"Updating or recovering the system board
80.
Upgrade and Maintenance Manual
219.
"Closing the server blade" on
92.
99.
Processors
62.
"Closing the rack
"Enabling
93.
"Enabling boot
"Enabling
169.
217