Installing The Tpm - Fujitsu PRIMERGY BX924 S3 Upgrade And Maintenance Manual

System board components
Ê Shut down the server blade as described in section
server blade" on page
Ê Remove the server blade from the rack as described in section
the server blade from the system unit" on page
Ê Open the server blade as described in section
on page 60.

10.3.1.3 Installing the TPM

Figure 110: TPM kit
TPM kit (S26361-F3299-E2):
1 TPM module
S26361-D2727-A10
2 TPM spacers
I
Use the black TPM spacer.
The white TPM spacer is not used in this server.
3 TPM special screw
C26192-Y10-C176
4 TPM bit insert for TPM special screw
252
54.
Upgrade and Maintenance Manual
"Shutting down the
"Removing
59.
"Opening the server blade"
BX924 S3