7.3.4
Concluding steps
Perform the following procedures to complete the task:
Ê Close the server blade as described in section
page
61.
Ê Reinstall and secure the server blade in the system unit as described in
section
"Installing the server blade in the system unit" on page
Ê If applicable, close the rack door as described in section
door" on page
Ê Enable boot watchdog functionality as described in section
watchdog functionality" on page
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
Ê If applicable, restore LAN teaming configurations as described in section
"After replacing / upgrading LAN/CNA controllers" on page
BX924 S3
67.
Upgrade and Maintenance Manual
"Closing the server blade" on
92.
99.
Mezzanine cards
62.
"Closing the rack
"Enabling boot
"Enabling
102.
151