Removing Ssd 0 - Fujitsu PRIMERGY BX924 S3 Upgrade And Maintenance Manual

Ê Remove the server blade from the system unit as described in section
"Removing the server blade from the system unit" on page
Ê Open the server blade as described in section
on page 60.
6.4.3

Removing SSD 0

Ê Remove the mezzanine carrier as described in section
mezzanine cards" on page 148
Figure 25: Removing SSD 0 from the mounting platform
Ê Loosen the knurled screw of the mounting kit (1).
Ê Unplug the mounting kit from the connector by lifting it off from the mounting
platform (2).
Ê Slide the mounting kit out of the cut-out (3) of the mounting platform.
BX924 S3
Upgrade and Maintenance Manual
Solid state drives
59.
"Opening the server blade"
"Removing
117