Concluding Steps - Fujitsu PRIMERGY BX924 S3 Upgrade And Maintenance Manual

Main memory
Figure 55: Securing the memory module
Ê Press down on the memory module (1) until the securing clips snap into the
cutouts at each end of the module (2).
8.2.4

Concluding steps

Perform the following procedures to complete the task:
Ê If applicable, reinstall the air cowls as described in section
cowls" on page
Ê If applicable, reinstall the mezzanine carrier as described in section
"Installing mezzanine cards" on page
Ê Close the server blade as described in section
page 61.
Ê Reinstall and secure the server blade in the system unit as described in
section "Installing the server blade in the system unit" on page
Ê If applicable, close the rack door as described in section
door" on page
Ê If available, update the system board BIOS to the latest version as described
in section "Updating or recovering the system board BIOS and iRMC" on
page 80.
170
178.
67.
Upgrade and Maintenance Manual
142.
"Closing the server blade" on
"Installing the air
62.
"Closing the rack
BX924 S3