Removing The Tpm - Fujitsu PRIMERGY BX924 S3 Upgrade And Maintenance Manual

System board components
Ê Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify
settings, refer to the "D3143 BIOS Setup Utility for PRIMERGY
BX924 S3" reference manual available online at
http://manuals.ts.fujitsu.com
supplied with your PRIMERGY server.
Ê If applicable, open the rack door as described in section
door" on page
Ê Locate the desired server blade as described in section
defective server blade" on page
Ê Shut down the server blade as described in section
server blade" on page
Ê Remove the server blade from the system unit as described in section
"Removing the server blade from the system unit" on page
Ê Open the server blade as described in section
on page 60.

10.3.2.3 Removing the TPM

Ê Remove the system board as described in section
board" on page
Ê Lay the system board on a soft, antistatic surface with its component side
facing down.
Figure 115: Removing the TPM screw from the underside of the system board
Ê Locate the slotted lower end of the TPM screw (see arrow).
260
53.
54.
272.
Upgrade and Maintenance Manual
or from the ServerView Suite DVD 2
45.
"Opening the server blade"
"Opening the rack
"Locating the
"Shutting down the
59.
"Removing the system
BX924 S3