Removing Ssd 1 - Fujitsu PRIMERGY BX924 S3 Upgrade And Maintenance Manual

Solid state drives
6.4.4

Removing SSD 1

Removing SSD 1 from the "dummy heat sink"
Figure 27: Removing SSD 1 from the mounting platform
Ê Loosen the knurled screw of the mounting kit (1).
Ê Unplug the mounting kit from the connector by lifting it off from the mounting
platform (2).
Ê Slide the mounting kit out of the cut-out (3) of the mounting platform.
Upgrade and Maintenance Manual 119
BX924 S3